Page 1 of 1

Microview via I2C or?

Posted: Thu May 25, 2017 3:09 pm
by mdblack98
I want to hook up a Microview to a RedBoard.
I've got I2C working with an air quality sensor and would like to send the info to the MicroView so this thing becomes portable.
Tried the I2C ports on the Microview but it seems to lock up the i2c bus.
I'm powering the MicroView with 5V from the RedBoard.

Any guidance on accexsing the MicroView via I2C?

Re: Microview via I2C or?

Posted: Fri May 26, 2017 6:27 am
by mdblack98 to this whole Arduino thing and didn't realize the MicroView had one built-in.
So all is working now connecting the microview to the air sensor A4 to SCA and A5 to SCL.