Page 1 of 1

Cant upload any of the programs

Posted: Fri Mar 06, 2015 7:10 am
by developer69
Double checked everything, I can see when I plug in Microview, I get Com2.
I make sure IDE is set to Com2.
Program will veryify and compile.
But when I do the upload, I get the following error:
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x01avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x01avrdude: stk500_recv(): programmer is not responding
.
.
.

Re: Cant upload any of the programs

Posted: Sun Mar 08, 2015 3:05 am
by Help@GeekAmmo
Hi,

1. Have you selected the board as Arduino UNO or MicroView?

2. If you have selected the right board, could you try with the latest FTDI driver please?

Cheers
JP

Re: Cant upload any of the programs

Posted: Mon Mar 30, 2015 10:34 am
by Moses
Getting the same problem and I have selected the board as the UNO. After installing the FTDI driver I have a COM1 port that only shows up when the microview is plugged in so I don't think its one of those two problems. My error looks like

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xae

Re: Cant upload any of the programs

Posted: Thu Apr 02, 2015 1:36 am
by Help@GeekAmmo
Hi Moses,

Can you contact SparkFun customer service quoting this thread and get RMA organized for you please?

Cheers
JP