Debugging Microview programs - Arduino IDE Debug Window?

General MicroView Support area - You have questions, find your answers here.

Moderators: phalanx, Help@GeekAmmo, marcus@geekammo

Post Reply
awardblvr
Posts: 13
Joined: Wed Nov 20, 2013 11:13 am

Debugging Microview programs - Arduino IDE Debug Window?

Post by awardblvr » Thu Oct 23, 2014 2:14 pm

Is the Arduino Serial port / IDE debug console window available for debug of programs on MicroView? Or, has the Microview OLED interface replaced this serial port usage?

Are there any tips in implementing this?

Thanks

Help@GeekAmmo
Posts: 41
Joined: Fri Jul 18, 2014 11:45 am

Re: Debugging Microview programs - Arduino IDE Debug Window?

Post by Help@GeekAmmo » Thu Oct 23, 2014 3:30 pm

Hi mate,

MicroView's serial port is exactly the same as Arduino. So you can Serial.println() data to it and watch the data on the debug console.

Hope this helps.

Cheers
JP

Post Reply