Page 1 of 1

Anyone building a wireless display out of your Microview?

Posted: Mon Sep 22, 2014 7:22 am
by doobie
I was thinking of making a wireless display using Xbee's, but I hate reinventing the wheel, I was hoping to find an eagle file for the microview and design a small board that could be battery powered.

Re: Anyone building a wireless display out of your Microview

Posted: Mon Sep 22, 2014 7:49 am
by scotta
doobie wrote:I was hoping to find an eagle file for the microview [...]
Eagle file for the MicroView is here:
https://github.com/geekammo/MicroView-PCB

Re: Anyone building a wireless display out of your Microview

Posted: Wed Sep 24, 2014 5:53 am
by doobie
That has the eagle file for the board, but what if I wanted to make a new board to connect to the microview, is there a library for that which has the pins sized/labeled? Sorry still new to eagle/doing my own PCBs.

Re: Anyone building a wireless display out of your Microview

Posted: Sun Mar 01, 2015 12:05 am
by seskindell
I have a PCB that has connection to an Xbee, 5v to 3.3v regulator and lipo charger. Will be adding to the circuit a battery gauge, vibrator and one or two push buttons.

Re: Anyone building a wireless display out of your Microview

Posted: Sun Mar 08, 2015 3:13 am
by Help@GeekAmmo
Hi doobie,

The USB programmer's eagle file has a MicroView foot print and pins labeled. The github link is here

https://github.com/geekammo/MicroView-U ... rammer-PCB

Cheers
JP

Re: Anyone building a wireless display out of your Microview

Posted: Fri Mar 20, 2015 8:18 am
by Schema
I've interfaced mine to an RN-XV, exactly the same pinout as an XBee but does Wifi instead. Pretty neat.

https://www.sparkfun.com/products/10822

Edit: If you end up making boards, I'd be interested in one or two!