Question for a project

General project discussion / help
Did you make a robotic coffee pot which implements HTCPCP and decafs unauthorized users? Show it off here!

Moderator: phalanx

Post Reply
colorz
Posts: 2
Joined: Tue Oct 23, 2018 11:55 am

Question for a project

Post by colorz » Tue Oct 23, 2018 12:01 pm

Hello guys.


First of all, i am very new here and i am not a tech geek, but i think this is my only hope to get things done ;-)

I have 3 on/off flip switches, and on every switch i want a voice play.. like if i switch On -> a voice says on Off -> a voice says 'off'


Which board/instrument do i exactly need for this to make it work? Also this need to be connect with my car stereo...

Someone some ideas?



With regards,

paulvha
Posts: 297
Joined: Sat Nov 11, 2017 2:39 am

Re: Question for a project

Post by paulvha » Fri Oct 26, 2018 10:06 am

Look at the Tsunami Super WAV trigger (https://www.sparkfun.com/products/13810). The board can play different MP3 based on a triggers / switches. You can record an MP3 with microphone on a PC to play 'ON' or 'OFF" or whatever (like "you really wanted to touch THIS switch?? ")

colorz
Posts: 2
Joined: Tue Oct 23, 2018 11:55 am

Re: Question for a project

Post by colorz » Fri Nov 02, 2018 1:36 pm

paulvha wrote:
Fri Oct 26, 2018 10:06 am
Look at the Tsunami Super WAV trigger (https://www.sparkfun.com/products/13810). The board can play different MP3 based on a triggers / switches. You can record an MP3 with microphone on a PC to play 'ON' or 'OFF" or whatever (like "you really wanted to touch THIS switch?? ")
Thanks, will look into it!

Post Reply