FNG all over again!!!

General project discussion / help
Did you make a robotic coffee pot which implements HTCPCP and decafs unauthorized users? Show it off here!

Moderator: phalanx

Post Reply
Posts: 1
Joined: Tue Oct 16, 2018 1:11 pm

FNG all over again!!!

Post by noelsimmons » Tue Oct 16, 2018 1:17 pm


WOW i don't know the first thing.

i am working on my first project EVER. i have the RN-52 with the power board and the ftdi basic as the totoral calls out.

OK, wired up.

NOW WHAT, how to I get my computer to "hook" to it?

im missing some very very basic knoledge

Support Volunteer
Posts: 2327
Joined: Fri Jun 15, 2007 9:41 pm
Location: Eugene, Or

Re: FNG all over again!!!

Post by jremington » Tue Oct 16, 2018 7:05 pm

Please post a link to the "totoral".

Posts: 242
Joined: Tue Nov 08, 2005 10:16 am
Location: Colorado

Re: FNG all over again!!!

Post by dlotton » Fri Oct 19, 2018 7:24 am

I think this is the tutorial...

https://learn.sparkfun.com/tutorials/rn ... 1524582848

Looks like you will need a terminal program. There's a link in the tutorial to another tutorial on serial terminal basics. Here's that link...


Post Reply