Page 1 of 1

Openscale with Xbee wireless modules

Posted: Mon Sep 24, 2018 7:53 am
by jobobt
I am modifying a load cell for a crane and I need wireless communication back to a laptop for recording the weight from OpenScale.

I have tried making it wireless by connecting the OpenScale serial out to a Xbee Explorer Serial board with a XBee Pro S1. I have a matching XBee Pro S1 module on a Xbee Explorer USB board connected to my laptop.

Openscale works correctly when connected directly to PC using USB cable. I have also verified communication through Xbee modules by sending serial communications from 1 PC to another. However when I disconnect the Openscale USB port and connect it to the Xbee serial board I get bad data. It is communicating, but the data is gibberish. It looks like maybe wrong baud rate setting, but I have verified and re-verified this setting. I have also tried other baud rates without success.

I am looking for any help on making this hardware configuration work or suggestions on different wireless communication hardware for the OpenScale.

Re: Openscale with Xbee wireless modules

Posted: Fri Sep 28, 2018 12:58 pm
by jobobt
Problem solved. I quit trying to make the xbees that I had on hand work and instead ordered the bluetooth mate gold for communication. Everything works great now.

Re: Openscale with Xbee wireless modules

Posted: Fri Sep 28, 2018 10:46 pm
by teprojects1
Good to know that you solved it. (Y)