Switching mains with a Raspberry [PHOTO]
Posted: Thu Aug 09, 2018 8:01 am
I am designing an interface for Raspberry to switch AC voltages from 24V AC up to 220V AC.
Simple ON/OFF, nothing fancy.
Current will not exceed 0.5A.
MOC3063 is used to drive a BT134 like below:
https://imgur.com/j2feM8Z
Would that work? I plan on not using any heatsink.
Simple ON/OFF, nothing fancy.
Current will not exceed 0.5A.
MOC3063 is used to drive a BT134 like below:
https://imgur.com/j2feM8Z
Would that work? I plan on not using any heatsink.