- Fri Mar 30, 2018 5:05 am
#198784
I got a 50 pack of some MicroUSB plugs from Amazon and they have the plug covers and such but I have since gone through 4 of them and not gotten one to work yet. The pads are TINY and Ive tried low heat and high heat to get the solder to melt quicker but I keep melting plastic even with a super fine tip. These things are pretty aggravating lol
So you know which ones I am talking about its these kind: https://i.imgur.com/ALfwsv6.jpg
I think part of the issue too is the cord I'm trying to fix has a thicker red and black cable than the green n white ones.
So, any ideas how best to get solder joints that are complete and not cold joints and dont melt the plastic at the same time?
So you know which ones I am talking about its these kind: https://i.imgur.com/ALfwsv6.jpg
I think part of the issue too is the cord I'm trying to fix has a thicker red and black cable than the green n white ones.
So, any ideas how best to get solder joints that are complete and not cold joints and dont melt the plastic at the same time?