- Sun Jun 19, 2016 6:34 pm
#190299
Hi Chip,
I built the programmable voltage reference, and all the hardware is working well.
I have spent an evening trying to figure out how to calibrate manually using the RevD firmware.
Could you possibly explain the serial command structure that was used and how an offset is written?
Thank you for a great and useful project!
Barbouri (Greg)
I built the programmable voltage reference, and all the hardware is working well.
I have spent an evening trying to figure out how to calibrate manually using the RevD firmware.
Could you possibly explain the serial command structure that was used and how an offset is written?
Thank you for a great and useful project!
Barbouri (Greg)