- Wed May 07, 2014 10:13 am
#170873
Two words ... switch bounce.
While it might be "inelegant", I still say an RC on the input to the flop, to hold the voltage/state, to give the clock time to do it's job, is a working design. It will also work to mitigate any switch bounce, given you do a quick discharge, slow charge circuit.
While it might be "inelegant", I still say an RC on the input to the flop, to hold the voltage/state, to give the clock time to do it's job, is a working design. It will also work to mitigate any switch bounce, given you do a quick discharge, slow charge circuit.