Wind turbine disconnect

General project discussion / help
Did you make a robotic coffee pot which implements HTCPCP and decafs unauthorized users? Show it off here!

Moderator: phalanx

Post Reply
Posts: 1
Joined: Tue Dec 05, 2017 2:29 pm

Wind turbine disconnect

Post by kyled » Tue Dec 05, 2017 2:46 pm

I have a unique project involving a homemade wind turbine. I would like to build a disconnect which would trigger a relay switch when electric grid power is lost. My objective is to have the positive and negative leads of my turbine attached to a relay switch which is closed with the power off and open when the power is on. (this will make the turbine brake) Since the wind turbine will be feeding this, I need the trigger to be sensitive enough to trip when most but not all of the power is lost.

Can anyone give me some direction on this. The relay switches I have found look like they are open without power and closed with power ( the opposite of what I want)?

Posts: 97
Joined: Tue Sep 20, 2016 11:12 am

Re: Wind turbine disconnect

Post by theropod » Wed Dec 06, 2017 10:20 am

Is this a grid tied turbine?

Post Reply