sparkfun redboard and windows10 upload problem

For the discussion of Arduino related topics.

Moderator: phalanx

Post Reply
edgarjohnfischer
Posts: 2
Joined: Mon Mar 20, 2017 8:13 pm

sparkfun redboard and windows10 upload problem

Post by edgarjohnfischer » Fri Mar 31, 2017 8:25 pm

My Windows10 stopped 'talking' to my redboard after having worked fine for many months.
When I try to upload to the redboard, it times out after quite a while and just reports it had trouble.
My redboard uses COM3 and the windows device manager says COM3 is working properly.
E. John Fischer (ejohnf@primus.ca)

edgarjohnfischer
Posts: 2
Joined: Mon Mar 20, 2017 8:13 pm

Re: sparkfun redboard and windows10 upload problem

Post by edgarjohnfischer » Sun Apr 02, 2017 7:33 pm

Problem corrected by setting board type to arduino/genuino nano! :-)
I should have remembered that, but I'm 85 years old ;-)

bobzooki
Posts: 4
Joined: Tue Apr 11, 2017 2:23 pm

Re: sparkfun redboard and windows10 upload problem

Post by bobzooki » Thu Apr 13, 2017 6:43 am

That's awesome that you're still creating things like this at 85! I'm a youngster at 60, but still having unlimited fun with these little beasties!

Post Reply