SparkFun Electronics Forum

hi everyone my name is sam. i'm new to this forum and would like a little help.
i'm trying to change some wiring to a board. the schematic is done but don't find how to make the pcb has i would.
i tryied auto-routing with Eagle and DipTrace but it doesn't work very well or i'm missing something. some wiring are missing.
can anyone can give me some help please?.
if so i can put the files in a post
thanks

Route it manually. The Eagle autorouter isn't very good unless the schematic is simple or you are using 4+ layer board.

Thanks lyndon I learned to route it manually and it works good, it is a four layer pcb.