pcb routing troubles

Questions relating to designing PCBs

Moderator: phalanx

Post Reply
samys13
Posts: 2
Joined: Thu Feb 22, 2018 11:10 am

pcb routing troubles

Post by samys13 » Thu Feb 22, 2018 1:17 pm

hi everyone my name is sam. i'm new to this forum and would like a little help. ;)
i'm trying to change some wiring to a board. the schematic is done but don't find how to make the pcb has i would.
i tryied auto-routing with Eagle and DipTrace but it doesn't work very well or i'm missing something. some wiring are missing.
can anyone can give me some help please?.
if so i can put the files in a post
thanks

lyndon
Support Volunteer
Posts: 1605
Joined: Thu Jul 17, 2008 6:37 pm
Location: Minnesota, USA

Re: pcb routing troubles

Post by lyndon » Wed Feb 28, 2018 5:13 am

Route it manually. The Eagle autorouter isn't very good unless the schematic is simple or you are using 4+ layer board.

samys13
Posts: 2
Joined: Thu Feb 22, 2018 11:10 am

Re: pcb routing troubles

Post by samys13 » Tue Mar 06, 2018 3:11 am

Thanks lyndon I learned to route it manually and it works good, it is a four layer pcb.

Post Reply