Page 1 of 1

Sparkfun eagle tutorial -parts not available in the library?

Posted: Thu Jan 05, 2017 8:25 am
by riverrock
Hi,

I'm following the Eagle Schematic tutorial.

https://learn.sparkfun.com/tutorials/us ... -schematic

I imported the sparkfun parts library.

However, when I download the finished reference design some of the components used in it are different to the ones available in the library? (Or am I doing something wrong?)

Theses part are not in the current library?

Code: Select all

Device: RESISTORPTH-1/4W (RESISTOR)
Package: AXIAL -0.4

Device: 10NF-PTH-10MM-10000V-1-% (10NF)
Package: CAP-PTH-10MM
The closet I could find were these. They are much bigger on the board layout.

Code: Select all

Device: 0.22OHM-0805-1/4W-1% (0.22OHM)
Package: 0805

Device: CAPPTH (CAP)
Package: CAP-PTH-SMALL
Thanks

Re: Sparkfun eagle tutorial -parts not available in the libr

Posted: Fri Apr 28, 2017 10:12 pm
by Ross Robotics
If you're still having issues, please post a reply.