specifying off-board components with Eagle

Questions relating to designing PCBs

Moderator: phalanx

Post Reply
sawdustagain
Posts: 1
Joined: Tue Oct 25, 2016 2:03 pm

specifying off-board components with Eagle

Post by sawdustagain » Tue Oct 25, 2016 2:24 pm

In Eagle, what is a good way to specify panel-mounted items (switches, pots, connectors, etc.) so the schematic is complete and readable, but enables me to create header connection pads on the circuit board for connecting wires to the panel-mounted items?

Post Reply