- Sun May 11, 2014 11:37 pm
#171032
Hi guys!
I'm new to PCB designs and recently got a LTC3588 breakout board for energy harvesting experiments.
The thing that is confusing me right now is that the pins name does not match the datasheet that Linear Tech has provided.
This is the one I got from SparkFun
And this is the schematic from the product page
https://www.sparkfun.com/datasheets/Bre ... er-v12.pdf
There is no PGood, SW, Vin2 and I've got 3 GND pin..
I would really appreciate it if anyone can help me out with this~ :bow-yellow: :bow-yellow: :bow-yellow:
I'm new to PCB designs and recently got a LTC3588 breakout board for energy harvesting experiments.
The thing that is confusing me right now is that the pins name does not match the datasheet that Linear Tech has provided.
This is the one I got from SparkFun
And this is the schematic from the product page
https://www.sparkfun.com/datasheets/Bre ... er-v12.pdf
There is no PGood, SW, Vin2 and I've got 3 GND pin..
I would really appreciate it if anyone can help me out with this~ :bow-yellow: :bow-yellow: :bow-yellow: