- Tue Jan 07, 2014 6:16 pm
#167096
I really don't know what it is called in PCB world but I was wondering how to do this. Attached is the picture to better explain what I want done.
https://skydrive.live.com/redir?resid=E ... oto%2c.JPG
Essentially, I want to create rectangular pads on the top metal layer which are connected to output and ground of a DC/DC converter IC. I want to solder wires to these outputs and take the output to the next circuit.
Any ideas who it gets done in Cadsoft eagle?
Thanks in advance.
Mayank
https://skydrive.live.com/redir?resid=E ... oto%2c.JPG
Essentially, I want to create rectangular pads on the top metal layer which are connected to output and ground of a DC/DC converter IC. I want to solder wires to these outputs and take the output to the next circuit.
Any ideas who it gets done in Cadsoft eagle?
Thanks in advance.
Mayank