- Thu Sep 12, 2013 10:34 am
#163444
Sorry if I've missed something obvious.
I'm trying to add a screw terminal from SparkFun-Connectors to my Schematic. If I choose ADD from within the Control Panel, I get the message: Can't backannotate this operation. Please do this in Schematic!
I then go into Schematic, press "Add a Part", select "sparkFun-Connectors, and scroll down to...It's missing. The list goes from SCREENKEYMATINGCONNECTOR to SD_CARD_SOCKET4UCONN and skips over all the screw terminals I saw in the library.
What am i doing wrong?
I'm trying to add a screw terminal from SparkFun-Connectors to my Schematic. If I choose ADD from within the Control Panel, I get the message: Can't backannotate this operation. Please do this in Schematic!
I then go into Schematic, press "Add a Part", select "sparkFun-Connectors, and scroll down to...It's missing. The list goes from SCREENKEYMATINGCONNECTOR to SD_CARD_SOCKET4UCONN and skips over all the screw terminals I saw in the library.
What am i doing wrong?