- Thu Apr 18, 2013 2:35 pm
#158557
Hey folks, if there's a better place to post this, please feel free to point me in the right direction.
I'm a noob at Eagle, and at this point it seems that I'm not going to have enough time to really figure out how to make it do what I need, so I'm putting out a call for some help.
What has me stumped is that I need to use a component that I can't find in an existing library, specifically a TI TPS2511, a USB charge port controller. This particular chip uses a PowerPad package, and requires vias for thermal dissipation, and preferably a good bit of copper top and bottom to help with this. I've found the basic package design in Eagle, but nothing that includes the thermal vias I'd need.
I'm hoping to find someone that can whip up a library with this chip. I'm building a multi-port iPad/iPhone/etc charging station. I think I should be able to do a small board with two of these and a dual USB port fairly cheaply, I'd need two such boards for my project.
I'm a noob at Eagle, and at this point it seems that I'm not going to have enough time to really figure out how to make it do what I need, so I'm putting out a call for some help.
What has me stumped is that I need to use a component that I can't find in an existing library, specifically a TI TPS2511, a USB charge port controller. This particular chip uses a PowerPad package, and requires vias for thermal dissipation, and preferably a good bit of copper top and bottom to help with this. I've found the basic package design in Eagle, but nothing that includes the thermal vias I'd need.
I'm hoping to find someone that can whip up a library with this chip. I'm building a multi-port iPad/iPhone/etc charging station. I think I should be able to do a small board with two of these and a dual USB port fairly cheaply, I'd need two such boards for my project.