SparkFun Forums 

Where electronics enthusiasts find answers.

Discussions about processor boards have here!
User avatar
By RonK
I would like to use the Winbond W25QXX128MBIT eeprom on the ESP32 Micromod processor board for data storage, preferably with a structure similar to SPIFFS. I am using the Platformio IDE and I have looked at the various arduino libraries but none seem to be just for this chip. I would greatly appreciate the details if anyone has found and used such a library.
Cheers, Ron
User avatar
By RonK
Thanks for that suggestion. However, I think they were dealing with flashing the chip stand-alone, whereas I need to write/read the W25xx from the ESP32 under program control.
Looking at the Sparkfun drawing for the ESP32 Micromod CPU board, the 6 W25xx lines are driven from the ESP32 SPICLK, SPIQ, SPID, SPIHD, SPIWP, and SPICS0 lines. I would have assumed that putting this chip on their board, Sparkfun would have provided software to access it, or at least make a reference to some third party software they based the installation on and have performed some testing with.
So my original question remains: does anyone know of software for the ESP32 that can drive a W25xx eeprom?
 Topic permissions

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum