SparkFun Forums

[rhashaan263]

Hey all,

I'm currently trying to use an interpolation library to do some data manipulation. I've downloaded the library for arduino IDE, but everytime I try to compile the code I get an error. It basically says it cannot compile due to an error in the actual library code, I'm not sure if there is a way around because the library works just fine if the IDE is set to arduino UNO, but gives an error if I use the redboard turbo. Not sure what to do, but any help would be greatly appreciated. Further down is the error message




C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:10:114: error: default argument given for parameter 5 of 'static double Interpolation::Step(double*, double*, int, double, double)' [-fpermissive]
double Interpolation::Step(double xValues[], double yValues[], int numValues, double pointX, double threshold = 1)
^
In file included from C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:8:0:
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.h:66:16: error: after previous specification in 'static double Interpolation::Step(double*, double*, int, double, double)' [-fpermissive]
static double Step(double xValues[], double yValues[], int numValues, double pointX, double threshold = 1);
^
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:24:112: error: default argument given for parameter 5 of 'static double Interpolation::Linear(double*, double*, int, double, bool)' [-fpermissive]
double Interpolation::Linear(double xValues[], double yValues[], int numValues, double pointX, bool trim = true)
^
In file included from C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:8:0:
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.h:70:16: error: after previous specification in 'static double Interpolation::Linear(double*, double*, int, double, bool)' [-fpermissive]
static double Linear(double xValues[], double yValues[], int numValues, double pointX, bool trim = true);
^
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:56:116: error: default argument given for parameter 5 of 'static double Interpolation::SmoothStep(double*, double*, int, double, bool)' [-fpermissive]
double Interpolation::SmoothStep(double xValues[], double yValues[], int numValues, double pointX, bool trim = true)
^
In file included from C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:8:0:
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.h:72:16: error: after previous specification in 'static double Interpolation::SmoothStep(double*, double*, int, double, bool)' [-fpermissive]
static double SmoothStep(double xValues[], double yValues[], int numValues, double pointX, bool trim = true);
^
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:75:119: error: default argument given for parameter 5 of 'static double Interpolation::CatmullSpline(double*, double*, int, double, bool)' [-fpermissive]
double Interpolation::CatmullSpline(double xValues[], double yValues[], int numValues, double pointX, bool trim = true)
^
In file included from C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:8:0:
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.h:73:16: error: after previous specification in 'static double Interpolation::CatmullSpline(double*, double*, int, double, bool)' [-fpermissive]
static double CatmullSpline(double xValues[], double yValues[], int numValues, double pointX, bool trim = true);
^
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:131:123: error: default argument given for parameter 5 of 'static double Interpolation::ConstrainedSpline(double*, double*, int, double, bool)' [-fpermissive]
double Interpolation::ConstrainedSpline(double xValues[], double yValues[], int numValues, double pointX, bool trim = true)
^
In file included from C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.cpp:8:0:
C:\Users\Rhashaan.Omar\Documents\Arduino\libraries\InterpolationLib-1.0.0\src\InterpolationLib.h:74:16: error: after previous specification in 'static double Interpolation::ConstrainedSpline(double*, double*, int, double, bool)' [-fpermissive]
static double ConstrainedSpline(double xValues[], double yValues[], int numValues, double pointX, bool trim = true);
^
exit status 1
Error compiling for board SparkFun RedBoard Turbo.

[rpiloverbd]

I think you need to update the board definitions through Arduino IDE and try again.

[rhashaan263]

Ok I’ll try again

[Dave Kelso]

In my case, the IDE 2 can't find Serial. This stub works fine on Zero:
void setup() {
Serial.begin(9600);
}
void loop() {
delay(1000);
Serial.println("hello, world");
}
But, when it's compiled with RedBoard Turbo, I get this error message:
C:\Users\kels\AppData\Local\Temp\arduino\sketches\B255FF406E7A217ED08B6D6B9533FF74\sketch\sketch_nov1a.ino.cpp.o: In function `loop':
C:\Users\kels\OneDrive\Documents\Arduino\Dave\sketch_nov1a/sketch_nov1a.ino:8: undefined reference to `Serial'
C:\Users\kels\AppData\Local\Temp\arduino\sketches\B255FF406E7A217ED08B6D6B9533FF74\sketch\sketch_nov1a.ino.cpp.o: In function `setup':
C:\Users\kels\OneDrive\Documents\Arduino\Dave\sketch_nov1a/sketch_nov1a.ino:3: undefined reference to `Serial'
collect2.exe: error: ld returned 1 exit status

exit status 1
Compilation error: exit status 1

Any ideas?

[TS-Russell]

The Redboard Turbo uses SERCOM for serial; check out this section of our guide https://learn.sparkfun.com/tutorials/re ... rial-ports