OpenOCD cannot find XDS110 debugger

Open source ARM Debugger

Moderator: phalanx

Post Reply
Posts: 2
Joined: Sun Mar 15, 2015 5:05 pm

OpenOCD cannot find XDS110 debugger

Post by modgen14 » Thu Nov 08, 2018 11:03 pm

I attempted to use openOCD v20180728 with TI CC1352 launchpad, the board worked with Code composer studio but failed to work with openOCD, can you please suggest a direction ?

Code: Select all

c:\OpenOCD-20180728\bin>openocd.exe -f board/ti_cc13x2_launchpad.cfg
Open On-Chip Debugger 0.10.0 (2018-07-28) []
Licensed under GNU GPL v2
For bug reports, read
Error: The specified debug interface was not found (xds110)
The following debug interfaces are available:
1: ftdi
2: usb_blaster
3: usbprog
4: jlink
5: vsllink
6: rlink
7: ulink
8: arm-jtag-ew
9: hla
10: osbdm
11: opendous
12: aice
13: cmsis-dap

Posts: 5
Joined: Fri Feb 01, 2019 1:15 pm

Re: OpenOCD cannot find XDS110 debugger

Post by mayor » Sun Feb 03, 2019 5:04 am

Looks like you build didn't include support for it. Make sure to add --enable-xds110 to your configuration options.

Post Reply