TI TLK10232 PHY
Posted: Thu Dec 21, 2017 5:17 am
Hello, i need to view register states in 10G Ethernet PHY TLK10232 (TI). We have its JTAG located on the board and olimex ARM-USB-OCD-H JTAG adapter.
As I used openocd before i do something like this:
openocd -f interface -f cpu -f target.
What is interface is clear for me. But what should be cpu and target?
Or what other ways exists to view registers?
As I used openocd before i do something like this:
openocd -f interface -f cpu -f target.
What is interface is clear for me. But what should be cpu and target?
Or what other ways exists to view registers?