TI TLK10232 PHY

Open source ARM Debugger

Moderator: phalanx

Post Reply
nonameletters
Posts: 1
Joined: Thu Dec 21, 2017 3:38 am

TI TLK10232 PHY

Post by nonameletters » Thu Dec 21, 2017 5:17 am

Hello, i need to view register states in 10G Ethernet PHY TLK10232 (TI). We have its JTAG located on the board and olimex ARM-USB-OCD-H JTAG adapter.
As I used openocd before i do something like this:
openocd -f interface -f cpu -f target.
What is interface is clear for me. But what should be cpu and target?
Or what other ways exists to view registers?

Post Reply