How can i get SWO/SWV messages trough OpenOCD
Posted: Tue Nov 21, 2017 6:56 am
I wrote a program which periodically sends SWO message "TICK" . I have an LPC1343 based development board, ARM-JTAG-SWD, ARM-USB-OCD-H (both boards are from Olimex) and Segger J-Link. The problem is that i can receive messages via Segger J-link and the program "JLinkSWOViewer".
When I connect J-Link to my board and start the program i recieve
When I connect J-Link to my board and start the program i recieve
TICKI can't manage to do so with Olimex's ARM-USB-OCD-H + ARM-JTAG-SWD + openocd. Is it even possible for openocd to print SWO/SWV messages? How to enable it. I'm using 0.9.0 version of openocd.
TICK
TICK
TICK