Invalid ACK (0) in DAP response
Posted: Thu Oct 26, 2017 10:56 am
I am attempting to get a Cortex-M1 up and running on an MicroSemi FPGA development Board. I got my design programmed into the ProASIC3 M1A3 FPGA but the SoftConsole debug keeps having OpenOCD time out with several of these statements. (I added a log file and the debug options to the Eclipse call of the openocd & gdb page of the debug configuration.
Error: 298 176 adi_v5_jtag.c:376 jtagdp_overrun_check(): Invalid ACK (0) in DAP response.
Below is a screenshot of my openocd debug settings in SoftConsole (Microsemi's Eclipse IDE).
Please help me. :violin:
Error: 298 176 adi_v5_jtag.c:376 jtagdp_overrun_check(): Invalid ACK (0) in DAP response.
Below is a screenshot of my openocd debug settings in SoftConsole (Microsemi's Eclipse IDE).
Please help me. :violin: