Page 1 of 1

OpenOCD support for TI's CC13xx / CC26xx

Posted: Mon Oct 23, 2017 11:41 am
by jobroe
Hi All,
I'm working with TI's LAUNCHXL-CC1310 board which has a XDS110 and I would like to use openOCD for debugging and flashing. Afer searching, reading and trying a lot, it is really unclear to me what is possible and where are the problems.

Is there anyone who know the current status of supporting TI's CC13xx / CC26xx ?

Is Debugging possible ? Flashing ?


Some few results of my analysis:

- A other thread about this topic ( wanted to reply but the mod wants me to make a new thread)
https://forum.sparkfun.com/viewtopic.ph ... xx#p190062

- TI Employee mentioned to work on support for XDS110
https://sourceforge.net/p/openocd/mailm ... /35869113/

- This Guy tried a lot
https://sourceforge.net/p/openocd/mailm ... /35765934/

- There is a Pullrequest adding flash support, but it wasn't merged ?
http://openocd.zylin.com/#/c/3719/

Thanks in advance !