FreeRTOS aware debugging with openocd
Posted: Sun Sep 24, 2017 11:32 pm
Hi,
I'm trying to debug a FreeRTOS project using openocd and arm-none-eabi-gdb
I'm starting openocd using:
What should I do?
Thanks.
I'm trying to debug a FreeRTOS project using openocd and arm-none-eabi-gdb
I'm starting openocd using:
Code: Select all
and my .gdbinit file has the following contents:
openocd -f /usr/local/share/openocd/scripts/board/stm32f0discovery.cfg -c "stm32f0x.cpu configure -rtos auto"
Code: Select all
The problem is that when I try to continue i get the error message "Cannot execute this command without a live selected thread." and I can't get passed that.target remote localhost:3333
monitor reset halt
file build/fw.elf
load
continue
focus next
What should I do?
Thanks.