OpenOCD and GDB slow stepping

Open source ARM Debugger

Moderator: phalanx

OpenOCD and GDB slow stepping

Postby SidPrice » Sat Aug 05, 2017 8:27 am

I am using GDB and OpenOCD with STLinkv2.1 debug pod. Stepping a line of 'C' code is VERY slow, sometimes taking many seconds. Is this expected or is there some configuration that is needed.
Posts: 2
Joined: Fri Dec 02, 2016 5:22 pm

Return to OpenOCD

Who is online

Users browsing this forum: No registered users and 1 guest