I am using st-link debugger with NRF51822 module.
I was trying to connect it openocd, but it failed. st-link is working with STM32 processor and able to flash through STM32 ST-LINK Utility
I was got error as follows.
Code: Select all
>openocd -f nrf51.cfg Open On-Chip Debugger 0.9.0-dev-00415-g2d4ae3f-dirty (2015-06-12-17:54) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html nrf51.cfg:5: Error: Can't find target/swj-dp.tcl in procedure 'script' at file "embedded:startup.tcl", line 60 at file "nrf51.cfg", line 5