RTOS ThreadX with arm926ejs
Posted: Wed Jan 21, 2015 2:47 am
Hi all,
I found that OpenOCD ThreadX supports only ARM Cortex M3 and R4 chips. What is required to add support for arm926ejs one? It needed to debug firmware on Cypress FX3 chips, for example. Without access to threads it is very difficult
I found that OpenOCD ThreadX supports only ARM Cortex M3 and R4 chips. What is required to add support for arm926ejs one? It needed to debug firmware on Cypress FX3 chips, for example. Without access to threads it is very difficult