Using OpenOCD 0.8.0 as a production programming tool for EFM

Open source ARM Debugger

Moderator: phalanx

Post Reply
MuratUrsavas
Posts: 1
Joined: Tue Oct 14, 2014 11:36 pm

Using OpenOCD 0.8.0 as a production programming tool for EFM

Post by MuratUrsavas » Wed Oct 15, 2014 12:08 am

Hi,

I'm trying to use OpenOCD as a production programming tool for EFM32 MCU'S over a JLink debugger (EFM32 Starter Kit). I've tried the existing methods which can be found on the web but none of them worked. Also tried to edit the related cfg files. But couldn't succeed. I'm still working on it, but a little help about the direction I should have, would be very helpful.

Thanks in advance.

// Murat

Post Reply