- Mon May 19, 2014 1:11 am
#171280
I have problem then i try to build last stable version OpenOCD on kubuntu 14.04.
Then i configure project with j-link support, system returns error with libusb 0.1 and libusb 1.x, although this libraries installed.
May be anyone solved similar problem. Output of configure and dpkg as follows:
Then i configure project with j-link support, system returns error with libusb 0.1 and libusb 1.x, although this libraries installed.
May be anyone solved similar problem. Output of configure and dpkg as follows:
Code: Select all
~/openocd-0.8.0$ ./configure --enable-jlink
checking whether standard drivers can be built... yes
checking for LIBUSB1... no
configure: WARNING: libusb-1.x not found, trying legacy libusb-0.1 as a fallback; consider installing libusb-1.x instead
checking for LIBUSB0... no
checking for HIDAPI... no
checking for HIDAPI... no
checking for HIDAPI... no
configure: error: libusb-1.x or libusb-0.1 is required for the Segger J-Link JTAG Programmer
Code: Select all
~/openocd-0.8.0$ dpkg -l | grep libusb
ii libgusb2:amd64 0.1.6-5 amd64 GLib wrapper around libusb1
ii libusb-0.1-4:amd64 2:0.1.12-23.3ubuntu1 amd64 userspace USB programming library
ii libusb-1.0-0:amd64 2:1.0.17-1ubuntu2 amd64 userspace USB programming library
ii libusb-dev 2:0.1.12-23.3ubuntu1 amd64 userspace USB programming library development files
ii libusbmuxd2 1.0.8-2ubuntu1 amd64 USB multiplexor daemon for iPhone and iPod Touch devices - library