- Wed Feb 12, 2014 8:36 am
#168381
Hello.
I'm encountering issues on my board, with a kinetis k60. My script works, I could program the flash memory.
But I interrupted the flash programming (by error) before the end, and now the JTAG can"t connect to the board.
I have theses messages :
Error: JTAG-DP STICKY ERROR
Error: MEM_AP_CSW 0x23000012, MEM_AP_TAR 0xe000ed00
I can't program flash, I can't halt the board, etc.
I'm wondering if a "mass erase" could solve my problem, but I don't know how to write on registers with openocd and a "broken jtag".
If someone have a idea on this problem...
Thanks !
I'm encountering issues on my board, with a kinetis k60. My script works, I could program the flash memory.
But I interrupted the flash programming (by error) before the end, and now the JTAG can"t connect to the board.
I have theses messages :
Error: JTAG-DP STICKY ERROR
Error: MEM_AP_CSW 0x23000012, MEM_AP_TAR 0xe000ed00
I can't program flash, I can't halt the board, etc.
I'm wondering if a "mass erase" could solve my problem, but I don't know how to write on registers with openocd and a "broken jtag".
If someone have a idea on this problem...
Thanks !