For the Redboard Artemis NANO:
Do all GPIO pins both source and sink current?
What are the individual pin source and sink current limits?
What is the maximum total of all pins current limit (both source and sink)?
Thanks for any replies.
Where electronics enthusiasts find answers.
Either set : #define mySDA D10 // use pin definition #define mySCL D9 or #define mySDA 40 // use pad definition #define mySCL 39
Could this explain why, after defining my SDA and SCL as D10/D9 in the Apollo 3 I2C example, my INA219 sensor is detected when it is wired to Nano pins 6/7?No, on a Artemis nano there are 2 wires predefined in the library :
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
We have created lots of YouTube videos just so you can achieve [...]
The best flat phpBB theme around. Period. Fine craftmanship and [...]
All you need is right here. Content tag, SEO, listing, Pizza and spaghetti [...]
this should be fantastic. but what about links,images, bbcodes etc etc? [...]