SparkFun Forums 

Where electronics enthusiasts find answers.

Tips, tricks, & best best practices using Artemis with your board designs.
User avatar
By yjoeyj
I'm using an Artemis Nano and would like to connect an SD card breakout to it.

I've connected the Adafruit ID4682 breakout, but it fails to initialize. I've connected the wires as:
MISO --> 13
CS -->9

I've used the standard SDinfo sketch with SDfat. I've double checked with an Arduino Due whether the breakout and sketch works, and it does. Any suggestions what I'm doing wrong?
User avatar
By yjoeyj
Thanks for your reply. I check pin 10, but it didn't work either. But I found my mistake, I had to update the Apollo3 board software (still working under 1.2.1), now works fine with CS pin 9. Thanks for your help!
 Topic permissions

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

long long title how many chars? lets see 123 ok more? yes 60

We have created lots of YouTube videos just so you can achieve [...]

Another post test yes yes yes or no, maybe ni? :-/

The best flat phpBB theme around. Period. Fine craftmanship and [...]

Do you need a super MOD? Well here it is. chew on this

All you need is right here. Content tag, SEO, listing, Pizza and spaghetti [...]

Lasagna on me this time ok? I got plenty of cash

this should be fantastic. but what about links,images, bbcodes etc etc? [...]