SparkFun Electronics Forum

Posted: **Thu Nov 30, 2006 9:26 pm**

When I load the SIM card onto the GM862-GPS module, and power the device on, the green light flashes for a few seconds, then goes red, is it powersaving? i would like to keep the device on to test through hyperterminal with the use of the at commands.

thanks
pat

Posted: **Fri Dec 01, 2006 1:53 am**

Open this pdf and see if you can find information:
http://www.telit.co.it/data/uploads_EN/ ... scr_r4.pdf

Page 22 says something about a led

Posted: **Fri Dec 01, 2006 11:01 am**

hey thanks, i have so many pdfs right now on this, i guess i overlooked it.

SparkFun Electronics Forum

GM862 USB eval board - flashing green light

GM862 USB eval board - flashing green light