- Mon Nov 27, 2006 11:01 am #22553
I wrote a program to read NMEA data into the onboard USART. I begin by sending a factory reset command to the IQ module then try to read one character into the uP but I get a framing error. I initialize the USART to transmit at 9600 baud and receive at 4800 baud . I purchased a SPARK FUN IQ-USB eval board and connected to my PC running with WINDOWS98 and running the Spark Fun Monitor program, it works fine but , if I initiate the IQ module with a factory reset, it quits working. Tech support person I talked to at Spark Fun would not tell me what parameters they are using to set up the IQ module. I would any help I might receive in operating the IQ module with the PIC16f627A operating at 4 mHz.