LS20031 + Raspberry PI

Tips and questions relating to the GPS modules from SFE

Moderator: phalanx

Post Reply
Posts: 12
Joined: Tue Dec 15, 2015 3:46 am

LS20031 + Raspberry PI

Post by jb63 » Tue Dec 22, 2015 1:54 pm

I managed to get the LS20031 to work with an UNO R3 board. Now, the next challenge is to repeat that with an RPI2. Most tutorials I've found talk about going through a USB interface. However, I wanted to 'talk' to the GPS module when it's connected DIRECTLY to the RPI GPIO. ANyone tried this and could shed some light?

Posts: 51
Joined: Sun Nov 22, 2015 8:54 pm

Re: LS20031 + Raspberry PI

Post by MonsterBot » Tue Jan 05, 2016 11:37 am

Raspberry Pi has GPIO library that you can use to access the pins. There's a Python library and also some for C.

Post Reply