Venus GPS with SMA setup

Tips and questions relating to the GPS modules from SFE

Moderator: phalanx

Post Reply
rlucas34
Posts: 1
Joined: Wed Mar 25, 2015 4:45 pm

Venus GPS with SMA setup

Post by rlucas34 » Wed Mar 25, 2015 4:51 pm

Hello.
Im having a hard time getting any kind of info on this board.
Im trying to use it in an APRS (automated packet reporting system. a ham thing.)
My tnc im using needs 4800 baud NMEA data. I curently have it hooked up to the tx0 spot. When I power up the led come on then start to flash after about a minut. Im assuming that that is the signal that it has a lock??

any help would be awsome.

thanks

rich.

thecatsandi
Posts: 1
Joined: Sat Dec 26, 2015 8:00 am

Re: Venus GPS with SMA setup

Post by thecatsandi » Sat Dec 26, 2015 8:02 am

The default data rate is 9600. you need to configure it for slower.

Post Reply