code for weather balloon.

Tips and questions relating to the GPS modules from SFE

Moderator: phalanx

Post Reply
moyera58748
Posts: 2
Joined: Mon Mar 02, 2015 10:15 pm

code for weather balloon.

Post by moyera58748 » Mon Mar 02, 2015 10:23 pm

Hello all,
I am new to this site. I am looking for code for the devices on a weather balloon. We have different sensors that will be attached to the payload. The parts that I have to find code for is adafru/1231, adafru,it/1900 and a adafru.iy/254. If any one can point me in the right direction it would be greatly appreciated.

jremington
Support Volunteer
Posts: 2306
Joined: Fri Jun 15, 2007 9:41 pm
Location: Eugene, Or

Re: code for weather balloon.

Post by jremington » Wed Mar 04, 2015 12:30 pm

Did you not notice that Adafruit provides example software for its products?

moyera58748
Posts: 2
Joined: Mon Mar 02, 2015 10:15 pm

Re: code for weather balloon.

Post by moyera58748 » Wed Mar 04, 2015 9:47 pm

I have looked all over there website but I have not found the code.

User avatar
Ross Robotics
Support Volunteer
Posts: 2007
Joined: Thu Jun 07, 2012 9:33 pm
Contact:

Re: code for weather balloon.

Post by Ross Robotics » Thu Mar 05, 2015 8:24 am

Have you downloaded and installed the libraries? If you did, you have the example code that came with them..

If you're looking for code that combines these modules, then there probably isn't one. You might get lucky by searching Google, maybe someone has posted their code that has done weather balloons. Hundreds of people have already done it.
------------------------------------------------------------------------------------------------------------------------------------------------------------
//codlink
Available for circuit and PCB design, just PM me!

Post Reply