- Fri Aug 04, 2006 9:25 pm
#16780
Take a look at the reference manual. By sending the EM406 "commands" you can change a bunch of things (uP or PC). Additionally, if you use the sirfdemo.exe program you can change even more things using the pull down menus that implement the binary protocol. Using the usb dev card you will be all set.
Regards Ryan
$25 SMT Kapton Stencils - http://www.ohararp.com/
US Distributor of PDS - http://www.ohararp.com/compilers.html
$25 SMT Kapton Stencils - http://www.ohararp.com/
US Distributor of PDS - http://www.ohararp.com/compilers.html