- Sun Jul 30, 2006 5:27 pm
#16412
I just got my Lassen iQ USB Eval Board and all is working well with iQ Monitor. iQ Chat only wants to talk on comm ports 1 and 2 and I haven't figured out how to get the USB driver to switch comm ports, but that is another problem I'm willing to tackle on my own.
However, I do have one question though...I see some pins labeled "Port Select" and I'm assuming that these would let me select port 2 on the Lassen iQ board so that I could see the NMEA data....does anyone know how to do this? The instructions PDF file is for the RS-232 board only and does not describe the USB board at all. Thanks in advance for the help
charlie
However, I do have one question though...I see some pins labeled "Port Select" and I'm assuming that these would let me select port 2 on the Lassen iQ board so that I could see the NMEA data....does anyone know how to do this? The instructions PDF file is for the RS-232 board only and does not describe the USB board at all. Thanks in advance for the help
charlie