- Sat May 05, 2012 6:03 am
#143987
We designed a product in which we have used SIM18 module.
Please help me to resolve the following issues.
--> SIM18 is connected to DSPIC33F micro controller through SPI
--> Periodically i am receiving GGA/GSA/GSV messages. but it contains no useful informations
--> How can i send input meessages to the module through SPI
-->I found no application notes on your website.Even i could not open your website properly
-->I have connected no batteries for RTC.
-->No sattelited detected
--> i have used external passive antenna.I have designed RF pads everything as per the datasheet.
--> what exactly idle pattern A7B4 means.Please give some sample code.
Please help me to resolve the following issues.
--> SIM18 is connected to DSPIC33F micro controller through SPI
--> Periodically i am receiving GGA/GSA/GSV messages. but it contains no useful informations
--> How can i send input meessages to the module through SPI
-->I found no application notes on your website.Even i could not open your website properly
-->I have connected no batteries for RTC.
-->No sattelited detected
--> i have used external passive antenna.I have designed RF pads everything as per the datasheet.
--> what exactly idle pattern A7B4 means.Please give some sample code.