SparkFun Electronics Forum

Posted: **Thu Jul 14, 2011 7:44 am**

I have two 10Hz LS20031 which are working perfectly. They come from the same order, but on one module, led is not blinking at all.
Is there a setting to make it blink ? I should also check if led soldering is ok.

Angelo

Posted: **Wed Aug 10, 2011 12:27 pm**

Is the data indicating that you have a lock on sat's?
My LED pulses only once at power on then no lock on LED or in data frames.

Steve.

Posted: **Thu Aug 11, 2011 1:43 pm**

Yes, I got a fix, positions, speed, alt,etc..... everything is ok, except led is not blinking.

Angelo

SparkFun Electronics Forum

LS20031 working ok, but no led blink.

LS20031 working ok, but no led blink.

Re: LS20031 working ok, but no led blink.

Re: LS20031 working ok, but no led blink.