SparkFun Forums

Where electronics enthusiasts find answers.

LS20031 working ok, but no led blink.#130149

By Polux rsv - Thu Jul 14, 2011 7:44 am

- Thu Jul 14, 2011 7:44 am #130149

I have two 10Hz LS20031 which are working perfectly. They come from the same order, but on one module, led is not blinking at all.
Is there a setting to make it blink ? I should also check if led soldering is ok.

Angelo

Re: LS20031 working ok, but no led blink.#131636

By stevecrozier - Wed Aug 10, 2011 12:27 pm

- Wed Aug 10, 2011 12:27 pm #131636

Is the data indicating that you have a lock on sat's?
My LED pulses only once at power on then no lock on LED or in data frames.

Steve.

Re: LS20031 working ok, but no led blink.#131682

By Polux rsv - Thu Aug 11, 2011 1:43 pm

- Thu Aug 11, 2011 1:43 pm #131682

Yes, I got a fix, positions, speed, alt,etc..... everything is ok, except led is not blinking.

Angelo

Options
3 posts

Page 1 of 1
3 posts

Return to “GPS”