- Mon Nov 29, 2010 9:18 pm
#114509
I have a TS-7800 ARM9 board from Technologic Systems that I would like to add an internal rs-232 GPS to. My end-game is to be able to poll the NMEA sentences to perform time synchronization and occaisional location queries.
I am new to SBC's and am confused about the connectivty between the GPS and the board. What do I need to make this happen? My board has several rs-232 connectors as seen here:
http://www.embeddedarm.com/products/boa ... ct=ts-7800
Do the GPS modules come with connectors that will interface with the board and if so how? How would a GPS module be mounted to the board? I realize that a GPS antenna will also need to be connected but I understand that part.
I apologize for the simple questions.
I am new to SBC's and am confused about the connectivty between the GPS and the board. What do I need to make this happen? My board has several rs-232 connectors as seen here:
http://www.embeddedarm.com/products/boa ... ct=ts-7800
Do the GPS modules come with connectors that will interface with the board and if so how? How would a GPS module be mounted to the board? I realize that a GPS antenna will also need to be connected but I understand that part.
I apologize for the simple questions.