Page 1 of 1
Venus GPS header files and example code
Posted: Wed Feb 03, 2010 11:51 am
by jpnovak
Just got to integrating my Venus GPS breakout board to the microcontroller.
Does anyone have library, header files and basic command sets for this chip?
I am connecting through the TX/RX pins (TTL serial). I will eventually use 115200 baud and 10Hz update.
Thanks
Re: Venus GPS header files and example code
Posted: Thu Feb 11, 2010 3:05 pm
by jeanseb
jpnovak wrote:Just got to integrating my Venus GPS breakout board to the microcontroller.
Does anyone have library, header files and basic command sets for this chip?
I am connecting through the TX/RX pins (TTL serial). I will eventually use 115200 baud and 10Hz update.
Thanks
I have c++ code for Visual C++ and an FTDI USB/Serial adapter if you're interested.
Posted: Fri Feb 12, 2010 8:41 am
by jpnovak
Thank you for the offer. You have a PM.
Posted: Mon Feb 15, 2010 2:28 am
by darkeagle
Please can you also send the code to me?
Thank you in advance.
D
Re: Venus GPS header files and example code
Posted: Tue Nov 08, 2011 3:59 pm
by pavdog
I know it's an old thread, but...
I'm looking for the same header files and example code. Does anyone have it?
Re: Venus GPS header files and example code
Posted: Tue Nov 08, 2011 10:54 pm
by Chanler
With an ftdi board and the GPS Viewer software, you can change the nvram settings as you'd like and they'll remain set. (In case you can't find the code to set it on your controller)